TL;DR: Would reduce CI pressure by cancelling more "unnecessary" runs
but I can't verify without running a merge queue.
A common development pattern is to push a change and then immediately
check CI results. Follow-up fix pushes are quite common, which leads to
multiple CI runs being queued for the same pull request.
In Cloud Hypervisor, the size and cost of the CI matrix means that
several consecutive pushes (for example 3-4 in a short time) put
significant pressure on CI runners and noticeably increase feedback
latency.
In practice, concurrency handling is especially tricky for the merge
queue. From personal experience: If one does not take special care, CI
runs triggered by a `merge_group` can cancel each other, as in a merge
queue there are two runs for each job by default: one for the normal PR
and one for the merge commit. This is easy to run into, also because the
available documentation and best practices for this feature are not very
good.
At the same time, our workflows do not run on `push` events, but only
on `pull_request` and `merge_group`. Because of this, using
`${{ github.ref }}` alone as a concurrency key is not very meaningful,
and in practice only few runs are actually cancelled for successive PR
updates. Therefore, we should improve the usage of this feature.
This change tries to improve the situation by refining the concurrency
group key. The goal is to keep cancellation for multiple PR pushes,
while at the same time preventing unintended cancellations in the merge
queue by separating `merge_group` runs from regular PR runs.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
`cargo rustc` is incompatible with virtual manifests, so the CI needs to
use cargo build instead. However, passing `RUSTFLAGS="-D warnings"` via
the environment would propagate to all dependencies, and some of them
currently fail to build under ``-D warnings` due to issues like [0]:
```
error: creating a mutable reference to mutable static
--> src/temp.rs:97:5
|
97 | DIRS.pop()
| ^^^^^^^^^^ mutable reference to mutable static
```
To resolve this, apply ``-D warnings` only to the `cargo clippy`
commands (which apply to our workspace only) and avoid enforcing it for
the entire cargo build.
[0]: https://github.com/cloud-hypervisor/cloud-hypervisor/actions/runs/19962283528/job/57245376263?pr=7525
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
A major improvement to the developer experience of clippy in
Cloud Hypervisor.
1. Make `cargo clippy` just work with the same lints we use in CI
2. Simplify adding new lints
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
This is required to support exclusive locking on files which is needed
for safe test ID generation when using nextest (since it runs each test
as a separate process.)
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
This is necessary to use the let-chains feature in a
follow-up. After upgrading to Rust edition 2024, clippy
wants to collapse various if's with let-chains.
Update image to 20250815-0 since MSRV in Dockerfile is updated.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
rustc 1.90.0-beta.1 (788da80fc 2025-08-04) suggests using library
feature `unsigned_is_multiple_of`. It is stabled in Rust 1.87.0.
Update image to 20250807-0 since MSRV in Dockerfile is updated.
Signed-off-by: Songqian Li <sionli@tencent.com>
Signed-off-by: Bo Chen <bchen@crusoe.ai>
The dependency `bitfield-struct` 0.10.x of `igvm` 0.3.5 requires MSRV
1.83.0, bump to catch up.
Update image to 20250412-0 because MSRV in Dockerfile is updated.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
We are having complains from Rust 1.86.0-beta.1 (f0cb41030 2025-02-17)'
clippy, which suggests us to replace `repeat().take()` with
`repeat_n()`. While `repeat_n()` is stablized in Rust 1.82.0.
Update image to 20250307-2 because MSRV in Dockerfile is updated.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
This lint disallows asserttions on is_ok()/is_err() in favor of either
using unwrap (so that at least if the test fails, we the failure message
will contain the actual failure reason instead of just "was not
ok/err"), or actually matching the specific variant.
Inspired by and quoted from @roypat.
Enable this lint for `build.yaml` and `quality.yaml`.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
The ability to control the rustc flags (required for adding new
attributes to the allowed list of #[cfg(..)]) requires bumping the MSRV
to 1.77.0
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
And clean up some of the whitespace formatting so that the "name" and
"on" are grouped away from the "jobs".
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
There is a mix of v2, v3 and v4 in the codebase. Let's move to v4
everywhere because v2 seems to be using a deprecated version of nodejs.
This is throwing warnings when the Github action CI is running.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Sev-Snp on MSHV uses igvm crate to parse the igvm file.
igvm crate needs minimum rust version 1.65 to build.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
This commit introduces three new dependencies: `zbus`, `futures`
and `blocking`. `blocking` is used to call the Internal API in zbus'
async context which is driven by `futures::executor`. They are all
behind the `dbus_api` feature flag.
The D-Bus API implementation is behind the same `dbus_api` feature
flag as well.
Signed-off-by: Omer Faruk Bayram <omer.faruk@sartura.hr>
This simplifies the CI process but also logical with the existing
functionality under "guest_debug" (dumping guest memory).
Fixes: #4679
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This simplifes the buld and checks with very little overhead and the
fwdebug device is I/O port device on 0x402 that can be used by edk2 as a
very simple character device.
See: #4679
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Given the AMX x86 feature has been made available since kernel v5.17,
and given we don't have any test validating this feature, there's no
need to keep it behing a Rust feature gate.
Fixes#3996
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This removes the requirement for the tests (dev-dependencies) to build
with all supported toolchains including the MSRV.
See: #4318
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Rust 2021 edition has a few improvements over the 2018 edition. Migrate
the project to 2021 edition by following recommended migration steps.
Luckily, the code itself doesn't require fixing.
Bump MSRV to 1.56 as it is required by the 2021 edition. Also fix the
clap build dependency to make Cloud Hypervisor build again.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
This includes the removal of testing without the "acpi" feature. The
command have been reordered to reduce the amount of recompilation
required.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
With the addition of the amx feature, add a new build workflow to
enable the feature and a clippy quality check.
Signed-off-by: William Douglas <william.douglas@intel.com>
With enabling the `vendered-openssl` feature, we can now cross-build the
`test_infra` crate for "musl" and "aarch64" targets. In this way, we
can remove the `test_infra` crate from the "exclude" list, so that this
crate can be checked and processed by "cargo clippy" and "cargo fmt".
More details can be found: https://docs.rs/openssl/latest/openssl/#vendored
As 'musl-gcc' is required, this commit also installs the `musl-tools`
package for our "build" github action on the musl target [1].
[1] https://github.com/actions-rs/toolchain/issues/102
Signed-off-by: Bo Chen <chen.bo@intel.com>
nightly / beta are not required actions but if they fail then all other
builds will be cancelled and so prevent the PR from being cleared as
buildable.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
