Instead of exiting on IO errors, report the errors to the guest with
VIRTIO_BLK_S_IOERR. For example, the guest kernel will log something
similar to this if the nbd behind /dev/vdc is unexpectedly disconnected:
[ 166.033957] I/O error, dev vdc, sector 264 op 0x1:(WRITE) flags 0x9800 phys_seg 1 prio class 2
[ 166.035083] Aborting journal on device vdc-8.
[ 166.037307] Buffer I/O error on dev vdc, logical block 9, lost sync page write
[ 166.038471] JBD2: I/O error when updating journal superblock for vdc-8.
[...]
[ 174.234470] EXT4-fs (vdc): I/O error while writing superblock
In case the rootfs is not located on the affected block device, this
will not crash the guest.
Fixes: #6995
Signed-off-by: Gauthier Jolly <contact@gjolly.fr>
This was caught by the nightly compiler during cargo fuzz build.
error: lifetime flowing from input to output with different syntax can be confusing
--> /home/runner/work/cloud-hypervisor/cloud-hypervisor/hypervisor/src/arch/x86/emulator/mod.rs:493:26
|
493 | pub fn new(platform: &mut dyn PlatformEmulator<CpuState = T>) -> Emulator<T> {
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ----------- the lifetime gets resolved as `'_`
| |
| this lifetime flows to the output
|
= note: `-D mismatched-lifetime-syntaxes` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(mismatched_lifetime_syntaxes)]`
help: one option is to remove the lifetime for references and use the anonymous lifetime for paths
|
493 | pub fn new(platform: &mut dyn PlatformEmulator<CpuState = T>) -> Emulator<'_, T> {
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
cargo fuzz build complaints about some un-used function in the
instruction emultator. Silence the warning by allowing dead code
generation.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Since it is used by multiple components at this point, it is better to
move it to workspace level dependency.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
There are a little many cpuid logs now. When starting a vm with
64 vcpu, we can get more than four thousand INFO messages:
cat vm1.log |grep 'arch/src/x86_64/mod.rs:891' |wc -l
4352
Signed-off-by: Yi Wang <foxywang@tencent.com>
As almost every sub crate depends on thiserror, lets upgrade it to a
workspace dependency.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
This commit adds the warning to deprecate the SGX support with the
intention to remove the support from code base in two release cycles.
See: #6960
Signed-off-by: Bo Chen <bchen@crusoe.ai>
This streamlines the Error implementation in the Cloud Hypervisor code
base to match the remaining parts so that everything follows the agreed
conventions. These are leftovers missed in the previous commits.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
This streamlines the Error implementation in the Cloud Hypervisor code
base to match the remaining parts so that everything follows the agreed
conventions. These are leftovers missed in the previous commits.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
This streamlines the Error implementation in the Cloud Hypervisor code
base to match the remaining parts so that everything follows the agreed
conventions. These are leftovers missed in the previous commits.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
This streamlines the Error implementation in the Cloud Hypervisor code
base to match the remaining parts so that everything follows the agreed
conventions. These are leftovers missed in the previous commits.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
This streamlines the Error implementation in the Cloud Hypervisor code
base to match the remaining parts so that everything follows the agreed
conventions. These are leftovers missed in the previous commits.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
This streamlines the Error implementation in the Cloud Hypervisor code
base to match the remaining parts so that everything follows the agreed
conventions. These are leftovers missed in the previous commits.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
This streamlines the Error implementation in the Cloud Hypervisor code
base to match the remaining parts so that everything follows the agreed
conventions. These are leftovers missed in the previous commits.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
This streamlines the Error implementation in the Cloud Hypervisor code
base to match the remaining parts so that everything follows the agreed
conventions. These are leftovers missed in the previous commits.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
This streamlines the Error implementation in the Cloud Hypervisor code
base to match the remaining parts so that everything follows the agreed
conventions. These are leftovers missed in the previous commits.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
This streamlines the Error implementation in the Cloud Hypervisor code
base to match the remaining parts so that everything follows the agreed
conventions. These are leftovers missed in the previous commits.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
When booting a Linux guest in SMP configuration,
the following kernel warning can be observed:
[Firmware Bug]: CPUID leaf 0xb subleaf 1 APIC ID mismatch 1 != 0
The reason is that we announce the presence of the extended topology
leaf, but fail to announce the x2apic ID in EDX.
Signed-off-by: Thomas Prescher <thomas.prescher@cyberus-technology.de>
On-behalf-of: SAP thomas.prescher@sap.com
No sane guest OS will allow hotplugging all cpus.
However, the REST API currently allows specifying
`ch-remote resize --cpus 0`.
On Linux, we can then observe the following error in the kernel log:
processor cpu0: Offline failed.
Subsequent resize commands via ch-remote will then fail with
VcpuPendingRemovedVcpu because the removal of cpu0 was never
successful.
Fix this by disallowing resizing to zero vCPUs.
Signed-off-by: Thomas Prescher <thomas.prescher@cyberus-technology.de>
On-behalf-of: SAP thomas.prescher@sap.com
For use in QEMU, I would like GuestMemoryRegion to return a BitmapSlice
instead of a &Bitmap. This adds some flexibility that QEMU needs in
order to support a single global dirty bitmap that is sliced by the
various GuestMemoryRegions.
However, this removes access to the methods of AtomicBitmap, and in
particular reset() and get_and_reset(). Fortunately, cloud-hypervisor
always uses GuestMemoryMmap, and therefore `region` is known to be a
&GuestRegionMmap. Dereferencing it returns the MmapRegion to which the
bitmap is attached, thus calling MmapRegion::bitmap(); this has the
same effect as `<GuestRegionMmap as GuestRegion>::bitmap()`, and works
both with or without https://github.com/rust-vmm/vm-memory/pull/324.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This streamlines the code base to follow best practices for
error handling in Rust: Each error struct implements
std::error::Error (most due via thiserror::Error derive macro)
and sets its source accordingly.
This allows future work that nicely prints the error chains,
for example.
So far, the convention is that each error prints its
sub error as part of its Display::fmt() impl.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
This streamlines the code base to follow best practices for
error handling in Rust: Each error struct implements
std::error::Error (most due via thiserror::Error derive macro)
and sets its source accordingly.
This allows future work that nicely prints the error chains,
for example.
So far, the convention is that each error prints its
sub error as part of its Display::fmt() impl.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
This streamlines the code base to follow best practices for
error handling in Rust: Each error struct implements
std::error::Error (most due via thiserror::Error derive macro)
and sets its source accordingly.
This allows future work that nicely prints the error chains,
for example.
So far, the convention is that each error prints its
sub error as part of its Display::fmt() impl.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
This streamlines the code base to follow best practices for
error handling in Rust: Each error struct implements
std::error::Error (most due via thiserror::Error derive macro)
and sets its source accordingly.
This allows future work that nicely prints the error chains,
for example.
So far, the convention is that each error prints its
sub error as part of its Display::fmt() impl.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
This streamlines the code base to follow best practices for
error handling in Rust: Each error struct implements
std::error::Error (most due via thiserror::Error derive macro)
and sets its source accordingly.
This allows future work that nicely prints the error chains,
for example.
So far, the convention is that each error prints its
sub error as part of its Display::fmt() impl.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
This streamlines the code base to follow best practices for
error handling in Rust: Each error struct implements
std::error::Error (most due via thiserror::Error derive macro)
and sets its source accordingly.
This allows future work that nicely prints the error chains,
for example.
So far, the convention is that each error prints its
sub error as part of its Display::fmt() impl.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
This streamlines the code base to follow best practices for
error handling in Rust: Each error struct implements
std::error::Error (most due via thiserror::Error derive macro)
and sets its source accordingly.
This allows future work that nicely prints the error chains,
for example.
So far, the convention is that each error prints its
sub error as part of its Display::fmt() impl.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
This streamlines the code base to follow best practices for
error handling in Rust: Each error struct implements
std::error::Error (most due via thiserror::Error derive macro)
and sets its source accordingly.
This allows future work that nicely prints the error chains,
for example.
So far, the convention is that each error prints its
sub error as part of its Display::fmt() impl.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
This streamlines the code base to follow best practices for
error handling in Rust: Each error struct implements
std::error::Error (most due via thiserror::Error derive macro)
and sets its source accordingly.
This allows future work that nicely prints the error chains,
for example.
So far, the convention is that each error prints its
sub error as part of its Display::fmt() impl.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
This streamlines the code base to follow best practices for
error handling in Rust: Each error struct implements
std::error::Error (most due via thiserror::Error derive macro)
and sets its source accordingly.
This allows future work that nicely prints the error chains,
for example.
So far, the convention is that each error prints its
sub error as part of its Display::fmt() impl.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
This streamlines the code base to follow best practices for
error handling in Rust: Each error struct implements
std::error::Error (most due via thiserror::Error derive macro)
and sets its source accordingly.
This allows future work that nicely prints the error chains,
for example.
So far, the convention is that each error prints its
sub error as part of its Display::fmt() impl.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
This streamlines the code base to follow best practices for
error handling in Rust: Each error struct implements
std::error::Error (most due via thiserror::Error derive macro)
and sets its source accordingly.
This allows future work that nicely prints the error chains,
for example.
So far, the convention is that each error prints its
sub error as part of its Display::fmt() impl.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
This streamlines the code base to follow best practices for
error handling in Rust: Each error struct implements
std::error::Error (most due via thiserror::Error derive macro)
and sets its source accordingly.
This allows future work that nicely prints the error chains,
for example.
So far, the convention is that each error prints its
sub error as part of its Display::fmt() impl.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
This streamlines the code base to follow best practices for
error handling in Rust: Each error struct implements
std::error::Error (most due via thiserror::Error derive macro)
and sets its source accordingly.
This allows future work that nicely prints the error chains,
for example.
So far, the convention is that each error prints its
sub error as part of its Display::fmt() impl.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
This streamlines the code base to follow best practices for
error handling in Rust: Each error struct implements
std::error::Error (most due via thiserror::Error derive macro)
and sets its source accordingly.
This allows future work that nicely prints the error chains,
for example.
So far, the convention is that each error prints its
sub error as part of its Display::fmt() impl.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
This streamlines the code base to follow best practices for
error handling in Rust: Each error struct implements
std::error::Error (most due via thiserror::Error derive macro)
and sets its source accordingly.
This allows future work that nicely prints the error chains,
for example.
So far, the convention is that each error prints its
sub error as part of its Display::fmt() impl.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
