cloud-hypervisor/docs/hotplug.md

Cloud Hypervisor Hot Plug

Currently Cloud Hypervisor only support hot plugging of CPU devices.

Kernel support

For hotplug on Cloud Hypervisor ACPI GED support is needed. This can either be achieved by turning on CONFIG_ACPI_REDUCED_HARDWARE_ONLY or by using this kernel patch (available in 5.5rc1 and later): https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/patch/drivers/acpi/Makefile?id=ac36d37e943635fc072e9d4f47e40a48fbcdb3f0

This patch is integrated into the Clear Linux KVM and cloudguest images.

CPU Hot Plug

Extra vCPUs can be added and removed from a running Cloud Hypervisor instance. This is controlled by two mechanisms:

1. Specifying a number of maximum potential vCPUs that is greater than the number of default (boot) vCPUs.
2. Making a HTTP API request to the VM to ask for the additional vCPUs to be added.

To use CPU hotplug start the VM with the number of max vCPUs greater than the number of boot vCPUs, e.g.

$ pushd $CLOUDH
$ sudo setcap cap_net_admin+ep ./cloud-hypervisor/target/release/cloud-hypervisor
$ ./cloud-hypervisor/target/release/cloud-hypervisor \
	--kernel ./hypervisor-fw \
	--disk path=clear-31890-kvm.img \
	--cpus boot=4,max=8 \
	--memory size=1024M \
	--net "tap=,mac=,ip=,mask=" \
	--rng \
    --api-socket=/tmp/ch-socket
$ popd

Notice the addition of --api-socket=/tmp/ch-socket and a max parameter on --cpus boot=4.max=8.

To ask the VMM to add additional vCPUs then use the resize API:

curl -H "Accept: application/json" -H "Content-Type: application/json" -i -XPUT --unix-socket /tmp/ch-socket -d "{ \"desired_vcpus\":8}" http://localhost/api/v1/vm.resize

The extra vCPU threads will be created and advertised to the running kernel. The kernel does not bring up the CPUs immediately and instead the user must "online" them from inside the VM:

root@ch-guest ~ # lscpu | grep list:
On-line CPU(s) list:             0-3
Off-line CPU(s) list:            4-7
root@ch-guest ~ # echo 1 | tee /sys/devices/system/cpu/cpu[4,5,6,7]/online
1
root@ch-guest ~ # lscpu | grep list:
On-line CPU(s) list:             0-7

After a reboot the added CPUs will remain.

Removing CPUs works similarly by reducing the number in the "desired_vcpus" field of the reisze API. The CPUs will be automatically offlined inside the guest so there is no need to run any commands inside the guest:

curl -H "Accept: application/json" -H "Content-Type: application/json" -i -XPUT --unix-socket /tmp/ch-socket -d "{ \"desired_vcpus\":2}" http://localhost/api/v1/vm.resize

As per adding CPUs to the guest, after a reboot the VM will be running with the reduced number of vCPUs.